How Many Nails Should You Put In Baseboard

How to Space for Finishing Nails on a Baseboard

Baseboard is the finishing touch for most flooring systems, and is designed to cover the gap between the wall and floor. Ranging from 3 to 6 inches in height, it can be a substantial material to fasten. Add in problems resulting from wall and floor contour, and fastening it correctly tin can get a challenge. Proper nail placement can alleviate these problems, leaving a tight, finished product that adds beauty to the abode.

Baseboard tin be installed at any angle when properly nailed.

Step 1

Use a stud finder to locate 2 or more studs in your wall. Measure the space between them. This will tell you the spacing used throughout the domicile. With this cognition, yous tin mensurate entire walls and mark a nailing pattern. If the drywall has been left high enough, you lot can even run across the studs from floor level, speeding upward the process.

Pace 2

Marker the location of the studs on the wall with a pencil so you lot know where to boom. Starting from the corner of the room, extend your tape measure and employ the distance and spacing adamant past the stud finder to place your pencil marks.

Step 3

Double-check your pencil marks occasionally by waving a stud finder over them. If they don't ostend the stud placement, check your measurements earlier proceeding.

Stride four

Add additional nails equally needed during the installation. Even nails that don't striking a stud will pull in the baseboard somewhat. If yous have a small gap, put a nail in the base at that location and try to pull it in.